Fenix TK25R Tactical LED Torch

Product Description Fenix TK25R is a specialist rechargeable flashlight designed for the Law Enforcement, Patrol and Search communities. It features 3600 lumens maximum output with a beam distance of 350m. The main beam profile is tuned for comfortable shorter distance operation, with good beam reach and hot spot & spill light. A cluster of side LED’s add impressive versatility with a white floodlight (2 levels), 900mw 365nm UV light, red light, red flashing light and red & blue flashing warning light. Mounted to a chest pocket using the supplied clip, TK25R’s side LED’s are ideal for hands free reading of documents in white or red beam colours. With the light standing vertically on its bezel, the alternately flashing red and blue LED’s provide a bright police warning signal, whilst the 365nm UV light is suitable for document checks etc. TK25R is operated by 3 switches. A tail mounted toggle switch selects between main beam, lock mode and side beams. The large rear tail cap button controls on/off and momentary-on, plus fast access 3600 lumen Turbo Mode. The smaller rear tail cap function button selects brightness levels or colour functions in their respective modes, and accesses one-touch Strobe output. The light is rechargeable via a USB-C socket in the neck (cable supplied) and charging time varies from 1.5 to 2.5 hours depending on the adaptor used. The supplied Fenix 5000mAh 21700 battery can be upgraded to a 6000mAh version to increase run time. For shock protection the battery tube features a spring at both ends. TK25R PERFORMANCE Duty Mode (main beam): Low: 30 lumens (55 hrs) – 30m beam Med: 350 lumens (7 hrs) – 100m beam High: 1000 lumens (3hrs total) – 170m beam Turbo: 3600 lumens (2hrs 20 min total) – 350m beam Tac Support Mode (side beam) White floodlight – Low: 30 lumens (30 hrs) White floodlight – High: 150 lumens (5 hrs) 365nm UV – 900mw Red – 15 lumens Red flash – 15 lumens Red/blue flash – 15 lumens TK25R FEATURES Cree XHP-50.3 LED with 5700K colour temperature Multiple side LED’s (White, UV, Red and Red/blue flash) Three tail mounted switches for convenient operation Momentary-on, one touch Turbo and one touch Strobe functions Lock-out function USB-C rechargeable with fast charging (1.5 to 2.5 hrs – charger dependent) Fenix ARB-L21-5000 V2 high power 21700 battery included Dual battery compartment springs for shock protection Battery and charge level LED indicator Last mode memory – remembers your brightness level excluding strobe Electronic over heat protection at 60 degrees C CNC machined A6061-T6 aluminium body with type 111 hard-anodized coating 5m impact rated Waterproof IP68 (2m depth) Compatible accessories: AOT-04 traffic wand ALC-03 360 degree rotating holster TK25R OPERATION On/Off: Tap (half press) the tactical switch to turn on the light momentarily, release it and the light will go out. Fully press the tactical switch to constantly turn on the light, fully press the tactical switch again to turn off the light. Mode switching: In any state, turn the tail toggle switch to select the needed mode. Turn the toggle switch to the left end to enter Duty mode, to the middle to enter Lockout/off mode, and to the right to enter Tactical support mode. Output Selection: Duty mode: In Duty mode, single click the functional tail switch to cycle through Low→Med→High→Turbo. Tactical support mode: In Tactical support mode, single click the functional tail switch to cycle through White light(Low) →White light(High) →UV light →Red light →Red flash →Red & blue flash. Lockout/off mode: With the light turned on, turn the tail toggle switch to Lockout/off mode to turn off and lock the light. The dual tail switch will not respond to any operation. Instant Turbo: On: With the light turned on, fully press the tactical switch and hold it for 0.5 seconds to enter Turbo, single click the functional switch to enter Low or White side light(Low). Off: Fully press the tactical switch to turn off the light. Instant Strobe: With the light turned on, press and hold the functional switch for 0.5 seconds to enter Strobe. Single click the functional switch or tap the tactical switch to recall the previously used output. With the light turned off, press the functional switch to enter Strobe instantly, release it and the light will go out. Intelligent Memory Circuit: The flashlight automatically memorizes the previously selected output excluding Strobe. When turned on again, the previously used output of the currently selected mode will be recalled. Battery Specifications: Fenix ARB-L21-6000B 21700 3.6 V Recommended √√ Fenix ARB-L21-6000 21700 3.6 V Recommended √√ Fenix ARB-L21-5000 V2.0 21700 3.6 V Recommended √√ Fenix ARB-L21-5000U 21700 3.6 V Recommended √√ Fenix ARB-L21-4000P 21700 3.6 V Recommended √√ *Do not mix batteries of different brands, sizes, capacities, or types. *Do not use 18650, CR123A, or 16340 batteries. *21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Using low-quality batteries or mishandling batteries (such as short-circuiting or overheating) could lead to combustion and jeopardize the safety of users and property. Any adverse effects resulting from the use of low-quality batteries are not covered by any Fenix warranty or liability. Using quality batteries with circuit protection will reduce the potential for combustion or explosion. Battery Replacement: Unscrew the light body and insert the battery with the anode side ( ) towards the light head, then screw the light body back on. Charging: Turn off the flashlight and open the anti-dust cap to reveal the charging port, then connect the USB Type-C end of the charging cable to the light. The battery level indicator will display red while charging and will turn green when fully charged. Once charging is completed, be sure to unplug the charging cable and close the anti-dust cover. Note: When charging fails or the battery is reverse connected, the battery level indicator will flash red to remind users to check the battery. The charging time of the included Fenix ARB-L21-5000 V2.0 battery is about 1.5 hours from depleted to fully charged with a 5 V/2 A charging adapter. The flashlight cannot be operated while charging. *Note: This only works with a Fenix ARB-L21 Series battery. Battery Level Indication: Each time the flashlight is turned on, the indicator will indicate the battery level and will last for 3 seconds. Green light on: saturated 100% – 85% Green light flashes: sufficient 85% – 50% Red light on: poor 50% – 25% Red light flashes: critical 25% – 1% *Note: This only works with a Fenix ARB-L21 Series battery. Intelligent Overheat Protection: The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the flashlight reaches a temperature of 60°C/140°F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the flashlight will gradually recall the pre-set output level. Low-voltage Warning: When the voltage level drops below the pre-set level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output, the battery level indicator blinks red to remind users to recharge or replace the battery in a timely manner. *Note: This only works with a Fenix ARB-L21 Series battery. SPECIFICATIONS LED Type: Cree XHP-50.3 LED Battery Type: 21700 Battery Quantity: 1 Additional Battery Type: Accepts full range of Fenix ARB-L21 series 21700 batteries Output/Runtime: Please refer to product description Flashing Modes: Strobe on main beam, red flash and combined red & blue flash on side lights Max Beam Distance: 350m Reflector: Smooth aluminium reflector Lens Type: Toughened Ultra – Clear glass lens with anti – reflective coating Switch Type: Dual tail switches and mode/lock-out toggle switch Construction: A6061-T6 aircraft grade aluminium Finish: Premium Type III hard-anodized anti-abrasive finish Tail Stand: No Pocket Clip: Yes Waterproofing: IP68, 2m depth & dustproof Dimensions: 164mm (Length) x 36mm (Head Diameter) x 26.2mm (Body Diameter) Weight: 225 grams (including battery)